Blog

Case Study: Cellular Connectivity for Challenging Urban Environments

August 23, 2013 — by WEBOOST

SHARE ARTICLE

This month’s case study features NewBay Media hailing from Manhattan! Take a look below–

Like many office buildings in densely populated urban environments, the Manhattan headquarters of NewBay Media subjects employees to cellular signal challenges. Those who work there have long complained of a universal lack of cell phone reception.

Business calls to company-issued cell phones are routinely dropped or never connected. As for using smartphone apps or other data tools, forget about it. Cell coverage was so bad the building was an ideal case study for installation of a cellular signal boosting system.

So when Wilson Electronics, a manufacturer of cell signal boosting equipment, and CK Technology Group, a New York City-based IT contractor, offered to install a signal booster system, the NewBay Media staff was thrilled at the prospect of having cellular service.

Within NewBay, the print and Web brands occupy different floors. Adding to the complexity faced by CK Technology, those two offices are located three floors apart and on different sides of the building. Brad Peskin, CK Technology director of operations, led the initial site survey to determine the precise inside locations where coverage was needed and for which cell carriers.

The next step was to determine the best spot to locate an external antenna. This antenna collects cell signals from outside the building and brings them inside where they then can be distributed to the areas that need coverage. Peskin calls this a “feeder” antenna.

Under normal circumstances this feeder antenna would be mounted on the building’s roof. But mounting any equipment on a Manhattan rooftop requires the landlord’s permission, and probably additional permits, insurance and damage waivers as well. Of course securing all these can cause significant delays to a project.

So to avoid that scenario Peskin designed a system for NewBay that included a feeder antenna for each floor mounted inside the building on a window, where the detected cell signal was strongest. However implementation of this novel solution was further complicated by a requirement of radio frequency antennas – the principle of separation distance.

If there is insufficient distance between a feeder antenna and a distributor antenna – which distributes cell signals to those areas inside the building that need better coverage, oscillation may occur causing the system to shut down. Oscillation is a feedback loop, like the shrill whistle that occurs when a microphone is placed too close to an audio speaker.

“The way we got around this likely scenario at NewBay, was to put the external antenna for the 12th floor system on the ninth floor and the external antenna for the ninth floor system on the 12th floor,” Peskin explained. “We found windows in the corners of each floor with adequate available signal and used window-mount antennas to feed the system for both floors.”

Because he had never attempted this type of solution before, Peskin conferred with Wilson’s technical support staff to confirm that his design would work. He calls the “stellar engineering support enjoyed by installers” a “huge benefit of installing Wilson products.”

With their biggest technical problem solved, all that was left for the CK Technology team was connecting the antennas with signal booster units, testing the system and fine tuning for optimal cell coverage. CK typically conducts system tuning over two to four weeks in a challenging RF environment like the NewBay offices.

Anthony Verbanac, NewBay Media IT director, monitored the booster system and solicited employee feedback after the installation was complete.

“After the final tuning of the system it appears to be working great,” Verbanac said.

“I am able to take calls on my cell phone; they are clear with no drops, and I now get voicemail notifications and SMS text messages. Also, battery life is noticeably longer since the phone isn’t constantly searching for a signal. Before the system was in place, cell phones were basically useless while in the office.”

Peskin said he chooses to use Wilson’s boosters over others in the market because of they have “proven to be robust, reliable, and most importantly, relatively easily deployed and affordable.”

SHARE ARTICLE

TAGS:

For buildings greater than 7500 sq ft, we recommend our WilsonPro brand of products.
signal bars
Improve your signal up to 32x
PLEASE LEAVE A COMMENT