Blog

Tech Question Tuesday

February 25, 2014 — by WEBOOST

SHARE ARTICLE

This week we’re answering some common technical questions about our Wilson DT signal booster. Keep reading and you might just have your own questions answered!

Q:  What is the range for the DT?
A:  The typical range for the DT is 15-20 feet of coverage from the indoor antenna. The coverage area can be increased or decreased, depending on the signal strength at the outdoor antenna.

Q:  What about 4G?
A:  If you would like 4G coverage, you will want the DT 4G (460101).
Q:  I have a MiFi card as well as a cell phone. Will this boost both? And can it boost them at the same time?
A:  The DT is designed to boost the voice, text, and up through 3G data (for 4G you will want the 460101). This will work to amplify the signal for the both devices when they are not in a 4G/LTE area, and to help the phone’s voice and text ability anytime there is a signal.
Q:  Do I need to have WiFi turned on for the booster to work?
A:  Wilson cell phone signal boosters simply boost the cell signal, and your phone should pick up the boosted signal regardless of the WiFi being turned on or not.
Do you have a question about one of our products? Let us know, and we could feature it in a blog post! Leave us a comment below, or let us know on Facebook/Twitter.
As always, if you have additional technical questions that weren’t addressed in this post, feel free to contact us at 1-866-294-1660 or tech@wilsonelectronics.com.
SHARE ARTICLE

TAGS:

For buildings greater than 7500 sq ft, we recommend our WilsonPro brand of products.
signal bars
Improve your signal up to 32x
PLEASE LEAVE A COMMENT