Blog

Technical Tuesday–the DT4G

March 25, 2014 — by WEBOOST

SHARE ARTICLE

This week for our Technical Tip Tuesday, we’re focusing on one of our newer Wilson cell phone signal boosters, the DT 4G. Got a question about one of our products that you would like to see answered on our blog? Let us know by leaving us a comment below, or send us a message on Facebook/Twitter.


Q:  Does the DT 4G meet the new FCC regulations?
A:  Yes, it sure does! The DT 4G is certified under the new FCC regulations.

Q:  Does the DT 4G support LTE too?
A:  Yes, the DT 4G will boost the LTE coverage for all major US carriers. If you want to learn more about 4G/LTE, check out this blog post.

Q:  How large of an area will the DT 4G cover?
A:  The typical area that the DT will cover is 15-20 feet from the indoor antenna. That coverage will depend on the signal at the outdoor antenna. If you are looking to cover a larger area, we recommend contacting our Customer Support department to discuss your particular situation. They can be reached by telephone at 866-294-9234 and/or email at tech@wilsonelectronics.com.

SHARE ARTICLE

TAGS:

For buildings greater than 7500 sq ft, we recommend our WilsonPro brand of products.
signal bars
Improve your signal up to 32x
PLEASE LEAVE A COMMENT