Blog

Tech Tip Tuesday

July 8, 2014 — by WEBOOST

SHARE ARTICLE

It’s Tech Tip Tuesday! We are answering a few questions about our DB Pro 4G. Got a question about one of our products that you would like to see answered on our blog? Let us know by leaving us a comment below, or send us a message on Facebook/Twitter.
Q:  Will the DB Pro 4G boost my LTE and improve my data transfer rates?
A: This will help with voice, text, 3G, and 4G/LTE for all major carriers in the US (except Clearwire). The maximum transfer rate is determined by your location in respect to the cell tower and what the tower can handle. If you are not getting the max from your tower, our device will help make sure you are getting the best transfer rates that the tower will allow.

Q:  Can I use this in my RV?
A: This system cannot be used in an RV, per FCC regulations. The only approved application for this system is inside a building.

Q:  How much coverage can I expect from this system? Can I add multiple inside antennas, if needed?
A: Typically, with a good signal outside, the DB Pro 4G can cover up to 3,000 to 4,000 square feet. The weaker your outside signal is, the less inside coverage you will achieve. If your outside signal is good, you may be able to add 1-2 additional antennas inside.

 

Got a specific question about the DB Pro 4G? Contact our Customer Support department to discuss your particular situation. They can be reached by telephone at 866-294-9234 and/or email at tech@wilsonelectronics.com.

SHARE ARTICLE

TAGS:

For buildings greater than 7500 sq ft, we recommend our WilsonPro brand of products.
signal bars
Improve your signal up to 32x
PLEASE LEAVE A COMMENT