Applied at checkout
Get $10 standard shipping on any order

10 ft. RG58 Low-Loss Foam Coax (N Male to SMA Male) | 955812

email me this page
Email me this page

Works on every network, on any carrier.

Product Description

10' of 50 Ohm, low-loss foam, black RG58 COAX cable; N-Male to SMA Male

Warning: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to


Model Number:955812
Price$ 14.99

Review Snapshot

Ratings Distribution


    Showing 10 out of 3 Questions

    Asked by JRemy 6 months ago

    Question: Can RG-6 coax wire be used for this ?

    Answer: Thank you for your question! It can but it's not recommended that you switch cable types and size. It can affect the way the signal is transmitted through the coax. If there's any other questions or concerns, please let us know by calling our customer support at 866-294-1660 or our online support at [email protected] Thanks again!

    Was this question helpful to you? Yes: 0 No: 0

    Asked by Don S 3 years ago

    Question: How is this different from ''?

    Answer: Thank you for your question. I apologize as the link appears to be broken. Please reach out to us here for assistance:

    Was this question helpful to you? Yes: 0 No: 0

    Asked by Sue Tremblay 4 years ago

    Question: I have a Wilson magnet mount antenna. I am looking for an extension cable because the one I have is not long enough. Can I just buy the 10 ft. RG58 Low Loss Foam Coax and attach it to the one I already have?

    Answer: Thank you for your question. This cable is not recommended, because of the N connector end. We don't recommend extending cable on a vehicle booster when at all possible- due to cable loss being higher in the thinner cabling. We recommend reaching out to us directly so we can recommend a situation that would best fit your needs. You can reach us here:

    Was this question helpful to you? Yes: 0 No: 0

    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.


    E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards