Applied at checkout
Get $10 standard shipping on any order

30 ft. White RG6 Low Loss Coax (F Male to F Male) | 950630

email me this page
Email me this page

Works on every network, on any carrier.

Product Description

30' of 75 Ohm, low-loss, white RG6 COAX cable; F-Male to F-Male.
Warning

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specs

Model Number:950630
Price$ 12.99

Review Snapshot

Ratings Distribution


    Q&A

    Showing 10 out of 4 Questions

    Asked by Gia 2 months ago

    Question: Do I need a cable connection with Apple iPad 125 MB's?

    Answer: Thank you for your question! You do not need a cable to connect your iPad to the booster. Any cellular device will automatically receive the boosted signal as long as the carrier is available in the first place. The amount of gain a cellular device receives depends on the outside signal strength that the booster is working with. If you have any other questions on how to amplify the cellular signal for your iPad, I suggest reaching out to our customer support team at 866-294-1660 or email our online team at [email protected] Thank you!

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Ann 4 months ago

    Question: Can I use COAX 9913 Equivalent Wilson cable (from a prior Yagi installation)?

    Answer: We do not recommend doing any manual alterations to our products. Doing so will result in potential failure in the product's authenticity. We recommend using the selected parts that come with the unit for optimal performance. If you have any issues or if there are any other questions or concerns, please let us know! Our contact info for our US-based phone support is at 866-294-1660 or our online support at [email protected]

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Salsa 9 months ago

    Question: A friend gave me their We boost 4g. It didn't have the cable. What do I need from the outside unit to the inside? Are both ends male or one of each? Thank you

    Answer: Thank you for your question! All you need is RG6 cable from the outside antenna to the amplifier and a desktop antenna that's SMA male. Our desktop antennas are available for purchase which does connect to the inside antenna connector directly. I would check that out here: https://www.weboost.com/products/301211 Please let us know if there's anything else we can assist with by calling our customer support at 866-294-1660 or our online support at [email protected] Thank you!

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Mark a year ago

    Question: can you extend the 30' RG6 cable?? and how will that affect the signal

    Answer: Thank you for your question! Yes it may, but depending on how far you want to extend it will affect the signal. I'd say extending the cable and extra 20 ft. won't be much of an issue unless in a very weak area. After 50 ft. or so I would switch to RG11 since that's a thicker cable and would have less signal loss over 50 ft. Please let us know if there's anything else we can assist with by calling our customer support at 866-294-1660 or our online support at [email protected] Thank you!

    Was this question helpful to you? Yes: 0 No: 0


    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

    Warning.

    E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards