Mini Magnet Mount Antenna (SMA-Male) | 301126

email me this page
Email me this page

Works on every network, on any carrier.

Product Description

Magnet Mount Omni-directional Antenna, 4.175 in., 50 Ohm, 10 ft. LMR-100 cable with SMA Male connector, includes mounting magnet. Commonly used with the Drive 4G-X.

For compatibility with the Drive Reach Cell Signal Booster Kit (470154), this antenna requires an SMA Female to SMB Adapter (970019).

Warning

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specs

Model Number:301126
Frequency700-800 MHz1.7 dB
824-894 MHz2.1 dB
880-960 MHz0.5 dB
1710-1880 MHz2.2 dB
1850-1990 MHz3.1 dB
2110-2170 MHz1.4 dB
Impedance50 Ohm
PolarizationVertical
ConnectorsSMA Male
Mount TypeRare Earth Magnet
DimensionsCoax Cable: RG-174 – 12.5 feet, Height: 4.175 in
Price$ 18.99

Resources

Review Snapshot

5
(1)

Ratings Distribution

  • 1 Star: 0
  • 2 Stars: 0
  • 3 Stars: 0
  • 4 Stars: 0
  • 5 Stars: 1

5

It works for me

I'm a truck driver so a signal is very important to me with this I have a signal all the time

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you? Yes: 5 No: 10

Submitted 4 years ago

By Maceo313

From Portsmouth, VA, USA

Verified Buyer

Q&A

Showing 10 out of 10 Questions

Asked by Bobby 6 months ago

Question: Is a SKU301126 compatible with a 4GXP 470210

Answer: Thank you for your question! Yes, they have the same connector and should work. It'll be the same as a standard Drive 4G-X with this antenna instead of the OTR antenna. Please let us know if there's anything else we can assist with by calling our customer support at 866-294-1660 or our online support at [email protected] Thank you!

Was this question helpful to you? Yes: 0 No: 0


Asked by Randy 2 years ago

Question: I have a wilson model 801201 and it only boosts 3g signal can this unit with a diffeant antenna boost 4g

Answer: Thank you for your question. Unfortunately, even with a 4G capable antenna, the 801201 will not be able to boost 4G, as there is only a 3G filter inside the board. We would be happy to go over options for your situation. Please reach out to us here: [email protected]

Was this question helpful to you? Yes: 0 No: 0


Asked by jsting 3 years ago

Question: I have a 2017 Ford F-450 with all aluminum body. What antenna do you suggest that will perform as well and with a mounting option that will work?

Answer: Thank you for your question. We do have the 304414 or 304415 antenna, but we understand these options may not be ideal in most truck bodies. We would like to work with you directly, to find a solution that would best fit your installation. Please reach out to us here: 866-294-1660 Or here: http://support.weboost.com/hc/en-us/requests/new

Was this question helpful to you? Yes: 0 No: 0


Asked by DanielSwartz 3 years ago

Question: Which antenna will has stronger reception for Sleek LTE Booster (Verizon), the 4" 301126 or the 12" 311128? I see the "dbi" specs in another post but I don't know what they mean. Is a higher number better, worse? Just need to know which one is better.

Answer: Thank you for your question. The higher the gain, the better. The 301126 will be a better antenna for data, while the 12'' is better for voice. For additional questions, you can reach us here: http://support.weboost.com/hc/en-us/requests/new

Was this question helpful to you? Yes: 0 No: 0


Asked by kcmark 3 years ago

Question: Will this antenna work with a RV 4G?

Answer: Thank you for reaching out to us! Unfortunately, the 301126 mini mag antenna is not FCC approved for use with the RV 4G at this time. For additional questions and antenna options feel free to reach us here: http://support.weboost.com/hc/en-us/requests/new

Was this question helpful to you? Yes: 0 No: 0


Asked by bpoole 3 years ago

Question: I need to re-order the cable that hooks up external antennae with the booster - the unit I ordered was weBoost Drive 4G-X - #470510. Should I order the external mini-magnet antennae with male connector - #301126 OR should I order the 301113?

Answer: Thank you for your question! The external mini mag antenna that comes with the Drive 4G-X kit is the 301126. Please let us know if you have more questions! http://support.weboost.com/hc/en-us/requests/new

Was this question helpful to you? Yes: 0 No: 0


Asked by Huntr 4 years ago

Question: Is this the antenna that is compatible with eqo home booster 

Answer: Thank you for your question. The 301126 is the suggested antenna listed in the guide of the Eqo booster. However, there are other antenna options which may be more optimal for your situation. We recommend reaching out to us directly here: http://support.weboost.com/hc/en-us/requests/new

Was this question helpful to you? Yes: 0 No: 0


Asked by Driver 4 years ago

Question: I need to replace the antenna and wire to my Model 811210...please advise which parts I need....thank you

Answer: Thank you for your question! Typically the 811210 has an FME connection, therefore you'd need this antenna (301113) found here: https://store.weboost.com/products/301113 To identify which antenna connection you have, please feel free to reach us here: http://support.weboost.com/hc/en-us/requests/new

Was this question helpful to you? Yes: 0 No: 0


Asked by MichaelS 4 years ago

Question: I own the WeBoost 460007.  Is this the proper antenna for that model? I cut the cable accidentally on the last one. I use Verizon's service.  PS it works great!

Answer: Thank you for your question! The 301126- 4'' magnetic antenna is the antenna that comes with the unit. You can find it here: https://store.weboost.com/products/301126 We are happy to see that the unit is working well for you, and if you have additional questions you can reach us here through our online support center here: http://support.weboost.com/hc/en-us/requests/new

Was this question helpful to you? Yes: 0 No: 0


Asked by UtahPete 4 years ago

Question: Does this antenna need to be mounted on a ground plane like the 12" mag mount antenna?  If so, how big does the ground plane need to be?  Also, how does the antenna gain for the mini compare to the 12"?

Answer: Yes, all magnet antennas will need a ground plane. We recommend at least 5"*5" ferrous metal plate. As for how the antennas compare, here are their specs: 4" Magnet Mount Antenna 700-800 MHz 1.7 dBi 824-894 MHz 2.12 dBi 880-960 MHz 1.5 dBi 1710-1880 MHz 3.12 dBi 1850-1990 MHz 3.12 dBi 2110-2170 MHz 1.4 dBi 12" Magnet Mount Antenna 700-800 MHz 1.9 dBi 824-894 MHz 5.12 dBi 880-960 MHz 3.1 dBi 1710-1880 MHz -4.0 dBi 1850-1990 MHz 6.12 dBi 2110-2170 MHz 2.3 dBi

Was this question helpful to you? Yes: 1 No: 0


BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

Warning.

E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards