75 Ohm Ceiling Mount Dome Antenna (DISCONTINUED) New product link below | 301151
Works on every network, for any carrier.
Product Description
Product discontinued, replacement antenna SKU 304419 click here for details.
Product discontinued, replacement antenna SKU 304419 click here for details.
Read More…
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Specs
| Model Number: | 301151 | |
| Frequency | 700-800 MHz | -2.5 dB |
| 824-894 MHz | 2.5 dB | |
| 880-960 MHz | -0.5 dB | |
| 1710-1880 MHz | 3.5 dB | |
| 1850-1990 MHz | 4.1 dB | |
| 2110-2170 MHz | 1.5 dB | |
| Impedance | 75 Ohms | |
| Polarization | Vertical | |
| Connectors | F-Female | |
| Dimensions | 8 inches / 20.32 cm | |
| VSWR | 1.5:1 | |
| Ground Plane | Built-in Ground Plane | |
| Price | $ 64.99 | |
Review Snapshot
Q&A
Showing 10 out of 2 Questions
Asked by RayV 3 years ago
Question: Will the roof antenna that I am using with my Wilson 3G booster system work with a 4G amplifier or do I have to replace it?
Answer: This dome antenna is not recommended for any 4G systems. The best overall antenna to use for each system is actually sold in the kit with the booster. Those antennas have the best gain overall for all frequencies in the US. If your current antenna is the Wide Band Directional antenna (314475/314411), then that antenna is the recommended antenna for building 4G boosters. Each booster has an installation guide available with all approved antennas listed as well. If you are not sure what antenna you have, please touch base with us for help identifying it. We can be reached through chat, [email protected], or 866-294-1660.
Was this question helpful to you? Yes: 0 No: 0
Asked by RayV 3 years ago
Question: Is this antenna for 4g lte systems. Also does this antenna connect to one end of the amplifier
Answer: Dome antennas are not the best option for any of the 4G LTE frequencies. You are much better of sticking with the panel antenna that is sold in the kit with the amplifier. The following is a chart for the Dome Antenna gains: 700-800 MHz: -2.5 dBi Gain 824-894 MHz: 2.5 dBi Gain 880-960 MHz: -0.5 dBi Gain 1710-1880 MHz: 3.5 dBi Gain 1850-1990 MHz: 4.1 dBi Gain 2110-2170 MHz: 1.5 dBi Gain As for the connection to the booster, you need at length of RG6 cable. The length of cable will be determined by which booster you are working with, your starting signal strength, and installation needs. You can see the approved antenna and cable combinations in each booster installation guide.
Was this question helpful to you? Yes: 0 No: 0
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
Warning.E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards