Works on every network, for any carrier.
Product Description
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Specs
| Model Number: | 311133 | |
| Frequency | 700-800 MHz | 3.1 dB |
| 824-894 MHz | 4.1 dB | |
| 880-960 MHz | 2.0 dB | |
| 1710-1880 MHz | -1.8 dB | |
| 1850-1990 MHz | 5.1 dB | |
| 2110-2170 MHz | -2.6 dB | |
| Impedance | 50 Ohm | |
| Antenna Type | Omni | |
| Polarization | Vertical | |
| Connectors | SMA Male | |
| Mount Type | 3-way Mount with Space Stud Part # 901104 | |
| Dimensions | Coax Cable: RG58 - 13.5 ft, Height: 21.5 inches including spring mount / 54.61 cm | |
| Price | $ 59.99 | |
Review Snapshot
Great booster and outside antennaes
Installed two boosters ($400) ones and found out that they only performed as advertised when phone was laying back to back with inside antenna. So, ordered inside antennae with bracket. Di this with both cars, but ordered rv antennae for my jeep which goes off path on National Forest Roads and needs best gain. When from -110 to -117 decibels to -75 or so... from no sevice to 4 bars. BUT only with phone bracket inside antennae. Next I will be installing booster for our cabin.z
Bottom Line Yes, I would recommend to a friend
Was this review helpful to you? Yes: 2 No: 0
Submitted 3 years ago
By BMWbiker
From Blue Ridge, GA, USA
Verified Reviewer
Verified Buyer
Q&A
Showing 10 out of 12 Questions
Asked by Camper 2 years ago
Question: Will this work with the Wilson Electronics Sleek 4g Kit?
Answer: Thank you for reaching out! This antenna would work with the Sleek 4G, but for better 4G coverage, we recommend the 304415 found here: https://store.weboost.com/products/304415
Was this question helpful to you? Yes: 1 No: 0
Asked by dnjj52 3 years ago
Question: I have two of the older Wilson (301133?) antennas that required the phone adapter for individual phones. Are adapters available for current production phones and if so, where may I purchase them?
Answer: Thank you for your question! There are still adapters available for certain types of phones. However, it will depend on which model of phone you have. Many of our re-sellers may still have these adapters available. In order to determine if your phone still has this capability, we recommend reaching out to us, here: http://support.weboost.com/hc/en-us/requests/new
Was this question helpful to you? Yes: 0 No: 0
Asked by RAMJAMS 3 years ago
Question: CAN THIS BE MOUNTED TO ROOF OF RV, AND IF SO DO I NEED ANY ADDITIONAL PARTS
Answer: Thank you for your question. You can mount this on top of your RV. This antenna will come with the mounting hardware you will need for your install. If you have any other questions feel free to reach out to us here: http://support.weboost.com/hc/en-us/requests/new
Was this question helpful to you? Yes: 0 No: 0
Asked by Jim42 3 years ago
Question: I have your antenna 311133 and I need the ground plane rods. One long and one short. How wound I get these? Thank you.
Answer: Thank you for reaching out to us. You can find them through our dealers. You can search part number 991167 on google and you will find many of our dealers to purchase from. If you have any other questions let us know how we can help: http://support.weboost.com/hc/en-us/requests/new
Was this question helpful to you? Yes: 0 No: 0
Asked by Jsh1904 3 years ago
Question: Would I need any additional hardware to use this with the 460102 3g booster? Would this antenna provide better signal than the one that came with the unit?
Answer: Thank you for your review! You would not need any additional hardware to mount this antenna. The antenna that comes with the unit and this antenna are very similar in gains. The benefit of having this antenna is that you will not need a grounding plane and it is more robust. If you have any other questions feel free to reach out to us here: http://support.weboost.com/hc/en-us/requests/new
Was this question helpful to you? Yes: 0 No: 0
Asked by cisdsmith 3 years ago
Question: Could this antenna be used with my 4G-RV? I do not like having to attach the external antenna that comes with the 4G-RV each time we camp. And I worry the suction cups could come lose and the antenna fall and break. If not this then what?
Answer: Thank you for your question! Unfortunately, none of the vehicle antennas have been FCC approved for use at this time. This booster can only be used while stationary, therefore, mostly permanent antennas are offered as suggestions. To comply with FCC standards, and to protect the antenna from travel damage, we recommend detaching the antenna during each move and placing it again when stopped. For additional questions you can reach us here through our online support center: http://support.weboost.com/hc/en-us/requests/new
Was this question helpful to you? Yes: 0 No: 0
Asked by Ricky Lee 3 years ago
Question: Will pairing this with my 4G-X give a better signal than the antenna included w/4G-X? I'll be in rural bottom area in an RV. Can it be attached to a pole/tree? What cable would I need for pole/distance mounting?
Answer: The 4'' magnetic antenna is recommended for the Drive 4G-X, for better data coverage. This antenna is an approved option for the kit, however, it will not provide optimal coverage on the data bands. For additional questions, and more detailed support you can submit a ticket here, to our online help center: http://support.weboost.com/hc/en-us/requests/new
Was this question helpful to you? Yes: 0 No: 0
Asked by 68camaro 3 years ago
Question: Will this antenna work on a connect 4g that is going to be in a stationary camper? Will it have to be mounted on a metal plate?
Answer: You could pair the 311133 with the Connect 4G, but it would not be optimal. The gains are lower across the board on this antenna than the directional antenna that is paired with the Connect 4G. This antenna would also require connectors to get connected to the RG-6 coax (F-Male ends), which can also be a source of some signal loss. The trucker antenna's are not as beneficial in the 4G frequencies, as the directional antenna. The antenna will not have to mounted to metal, as it has its own ground plane. For this antenna, we recommend the 3- Way mount - 901104: https://store.weboost.com/products/3-way-mount-with-spade-stud-901104
Was this question helpful to you? Yes: 0 No: 0
Asked by Mbp432 4 years ago
Question: I need a trucker antenna and I'm going to be using the drive 4G S cradle, can you give me a list of what I need to buy including adapters or anything.
Answer: This antenna will hook directly into the booster, and you don't need any adapters or connectors.
Was this question helpful to you? Yes: 0 No: 0
Asked by Robb 4 years ago
Question: I have your RV Trucker Spring Mount antenna on our RV. My previous flip phone connected with a short adapter cord to it's antenna jack. I now have an LG UX5400 that has no antenna jack. Is your cradle adapter still available for this phone? No internet.
Answer: You are correct that the UX5400 does not have an external antenna port, which means you will need a booster rather than just an antenna. You can use the Drive 3G-S to boost the voice signal to the phone if you are looking for the cradle style. https://store.weboost.com/products/drive-3gs Your RV Trucker Spring Mount Antenna will just need an adapter for the cable so that it can connect to the Drive 3G-S. https://store.weboost.com/products/connector-971119
Was this question helpful to you? Yes: 0 No: 0
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
Warning.E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards