Applied at checkout
Get $10 standard shipping on any order

Cell LinQ Pro Meter w/ Hard Case | 910055

email me this page
Email me this page

Works on every network, on any carrier.

Product Description

State-of-the-art engineering enables access to accurate information required to effectively design, install and validate performance for various types of cellular amplifier systems, all at the touch of a button.

The LinQ meter app works in tandem with the meter and allows you to view, tune and store 3G and 4G tower data and carriers. A survey is performed by linking the Cell LinQ meter to the Cell LinQ app via Bluetooth on either an iOS or Android supported device.

Features

  • Multi-Generation LTE, Cellular, AWS and PCS Scanner
  • Live mode for fine tuning single or multiple cells
  • Identifies active carriers
  • Generation and carrier filters
  • Geo-mapping of all active cells within scan range
  • 4G Signal Strength (RSRP) and Signal Quality (RSRQ)
  • 3G Signal Strength (RSCP) and Signal Quality (EC/IO)
  • Details Location, Tower ID, Downlink Frequency, Distance to Tower
  • Capture, store and export all scan results
  • Powerful project management features
  • Survey results time stamps for A/B comparisons

Kit Includes

  • Durable Meter Case
  • Meter and Dipole Terminal Antenna
  • 40" SMA Male to N Male Cable
  • Adapters (4)
    • N Female to N Female
    • N Female to F Female
    • N Female to F Male
    • N Female to SMA Female
  • Charger - Power Cube, 120 V, 3' USB Cord
Warning

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specs

Model Number:910055
Price$ 1199.99

Review Snapshot

Ratings Distribution


    Q&A

    Showing 10 out of 2 Questions

    Asked by Airwave 4 months ago

    Question: The Cell Linq app does nothing without registering. I am unable to register without a registration code. When I click on "I don't have a code" it directs me to the signalteq site and a message saying that the LinQ Meter + App is "currently on backorder".

    Answer: Hi there! The Cell LinQ app is only activated with code provided when purchasing the kit. It seems that the kit is on backorder which will prevent you from receiving a code to use to activate the app to use with the signal meter. If you have any issues or if there are any other questions or find concerns, please let us know! Our contact info for our US-based phone support is at 866-294-1660 or our online support at [email protected]

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Airwave 4 months ago

    Question: Since it requires the iOS or Android app, is there a cost for the app?

    Answer: Hey there! There's no cost for the app when purchasing the signal meter. There should be a special code that you use to activate the service provided in the app, the app itself is free though. If you need any other assistance, please let our customer support know at 866-294-1660 or you can email us at [email protected] Thank you!

    Was this question helpful to you? Yes: 0 No: 0


    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

    Warning.

    E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards