Splitter -3 dB 2 Way (N-Female) | 859957

email me this page
Email me this page

Works on every network, on any carrier.

Product Description

2 Way Splitter, 50 Ohm with N Female Connectors. -3 dB, 700-2700 MHz. For use in signal distribution systems to split the amplified signal with minimum signal loss. Equal amounts of signal sent to multiple antennas for similarly sized areas.
Warning

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specs

Model Number:859957
Price$ 89.99

Resources

Review Snapshot

Ratings Distribution


    Q&A

    Showing 10 out of 3 Questions

    Asked by Steve a year ago

    Question: I have intermittent signal strengths from 2 different antennas. I would like to install 2 weboost receiver antennas. Is part no. 859997 the right product to do that? My 2 antennas are a mod 314475 and a 314411

    Answer: 859997 is a power supply and not a unit. I suggest a home amplifier like the Home 4G, Connect 4G, or Connect 4G-X to be able to use two antennas. Two antennas may be okay, but generally one antenna will fulfill most peoples needs unless they need to have two different towers pointed to. Two antennas will not increase your signal gain on our units.

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Andypandy 4 years ago

    Question: do you have a splitter for the mini coax connections? I have a DT and i also purchased a wall mount antenna, i want to put the desk top antenna on my desk but also run the wall mount downstairs, is this possible?

    Answer: Thank you for your question. We do not have a splitter with smaller connections as we do not recommend splitting to another antenna with the DT or Home 3G and Home 4G. If you are looking for more coverage, I would recommend moving to a larger coverage area product. The Connect 4G and Connect 4G-X product would be able to split to new antennas. If you have any other questions feel free to reach out to us here: http://support.weboost.com/hc/en-us/requests/new

    Was this question helpful to you? Yes: 0 No: 0


    Asked by susan 4 years ago

    Question: What is the difference between this splitter and the 859993? I have a wilson electronics 460103-db pro

    Answer: This splitter is 50 ohm, with N connectors, and the 859993 is 75 ohm with F connectors. You need the 75 ohm splitter for the 460103 DB Pro.

    Was this question helpful to you? Yes: 0 No: 0


    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

    Warning.

    E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards