Splitter -3 dB (F-Female) | 859993
Works on every network, for any carrier.
Product Description
470103
Connect 4G
472205
Connect 3G Directional
472105
Connect 3G Omni
Specs
| Model Number: | 859993 | |
| Price | $ 89.99 | |
Review Snapshot
Q&A
Showing 10 out of 1 Questions
Asked by BillR 3 years ago
Question: In our building, we will need to use two 100 foot long runs of coax from the splitter to the two inside antennas. Will this work or will there be too much signal attenuation over a 100 foot run of coax?
Answer: The loss would largely depend on what the outside signal looks like. We recommend obtaining these readings, so we can help calculate loss and decide if the booster will be able to support the longer cable runs. You can submit a support ticket here for additional assistance: http://support.weboost.com/hc/en-us/requests/new This will allow us to go over your direct situation in more depth.
Was this question helpful to you? Yes: 0 No: 0
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
Warning.E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards