Splitter -4.8 dB 3 Way (N-Female) | 859980

email me this page
Email me this page

Works on every network, on any carrier.

Product Description

3 Way Splitter, 50 Ohm with N Female Connectors. -4.8 dB, 700-2700 MHz. For use in signal distribution systems to split the amplified signal with minimum signal loss. Equal amounts of signal sent to multiple antennas for similarly sized areas.
Warning

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specs

Model Number:859980
Price$ 99.99

Review Snapshot

Ratings Distribution


    Q&A

    Showing 10 out of 3 Questions

    Asked by Riceman 4 years ago

    Question: What is the maximum input power rating of the 859980 and is there any isolation between the outputs?

    Answer: Thank you for your question. The maximum input for our splitters will be 1 watt. There is no isolation between the outputs. You will have an insertion loss of 4.8 dB at each output with this particular splitter. If you have any other questions feel free to reach out to us here: http://support.weboost.com/hc/en-us/requests/new

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Jim817 4 years ago

    Question: Is this a 50 Ohm or 75 Ohm Splitter? I have a weboost Connect 4GX. I think I need a 50 Ohm splitter. Correct?

    Answer: The 859980 is a 50 ohm splitter with N connectors. It can be used with the Connect 4G-X as long as you have enough starting signal to support that many antennas.

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Jim817 4 years ago

    Question: What specific frequencies work with this splitter? For example is the popular 850/1900 MHz frequency supported?

    Answer: The 859980 50 ohm splitter is designed to be used with anything from 700-2700 MHz. For the cellular frequencies, there is approximately 4.8 DB of loss using this splitter.

    Was this question helpful to you? Yes: 0 No: 0


    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

    Warning.

    E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards