Works on every network, for any carrier.
Product Description
24 in. 4G OTR Truck Edition omni-directional, 50 Ohm. Window mount, 14 ft of RG58 with connector, includes mirror mount hardware.
New and Improved 4G Trucker Antenna click HERE
*Wilson Electronics is not affiliated with Wilson Antennas
24 in. 4G OTR Truck Edition omni-directional, 50 Ohm. Window mount, 14 ft of RG58 with connector, includes mirror mount hardware.
New and Improved 4G Trucker Antenna click HERE
*Wilson Electronics is not affiliated with Wilson Antennas
470510
Drive 4G-X
Specs
| Model Number: | 304414 | |
| Frequency | 700-900 MHz | 2.5-3.5 dBi |
| 1710-2270 MHz | 2.5-3.5 dBi | |
| 1850-2160 MHz | 2.5-3.5 dBi | |
| Impedance | 50 Ohm | |
| Maximum Input Power | 50W | |
| Antenna Type | Omni-directional | |
| Polarization | Vertical | |
| Connectors | SMA Male | |
| Mount Type | 3/8-24 Threaded Stud | |
| Dimensions | Coax Cable: RG-58 - 14 ft, Height: 29.85" x 7.75" x 4 | |
| Price | $ 99.99 | |
Review Snapshot
Works well as advertised
It works as advertised. A little bit ugly, but the added signal makes up for that. This is my second antenna of this type and is built way better than the older ones. I drive all over rural areas in the western US, mostly in the mountains of Colorado. You really don't grasp how well this antenna (and booster) works until you hop in a different vehicle that doesn't have one. And to one of the reviewers who mentioned you cannot use a different type of mirror mount than what is provided is completely false. I currently have it mounted on a heavy duty k40 mount. My only complaint about this antenna is the coax not being detachable.
Bottom Line Yes, I would recommend to a friend
Was this review helpful to you? Yes: 1 No: 0
Submitted 3 months ago
By Just some truck driver
From CO
Verified Reviewer
Not as advertised
The antenna comes permanently affixed to the wire for connection to the booster. The antenna likely works well, although it does appear to be brittle. Since the antenna and wire are permanently attached, it MUST be used with the included mirror mount, and therefore cannot at all be used with an aftermarket mount. Additionally, a spring cannot be added to this system since the wire is permanently attached. Something very important that is not included in the primary description or picture. I will likely return for a different product. That being said, it does stand tall, and appears like it would work well....if it could be used.
Bottom Line No, I would not recommend to a friend
Was this review helpful to you? Yes: 0 No: 1
Submitted 5 months ago
By john
From somewhere
Verified Reviewer
Excellent Design
Happy to say I get more bars on the road using this antenna. Antenna feels sturdy and durable enough for long hauls.
Bottom Line Yes, I would recommend to a friend
Was this review helpful to you? Yes: 4 No: 0
Submitted 2 years ago
By Raul Jr
From Miami, FL, USA
Verified Reviewer
Verified Buyer
Q&A
Showing 10 out of 2 Questions
Asked by kordate 2 years ago
Question: Your recommendation for best external omnidirectional antenna for a weboost 470007 used in RV as mobile hotspot (AT&T) and to be mounted on a mast which can be cranked flat to roof when driving? Height is a benefit - tall rigs block signal. Thanks!
Answer: Thank you for reaching out to us! The most popular omni antenna for the Drive 4G-S is the 304414 Mirror Mount antenna, or the 304415 Spring Mount. These models will both come with a three way spade stud, so it's questionable on whether it would lay completely flat on a mast. We are happy to answer any other questions you may have. You can reach us here: http://support.weboost.com/hc/en-us
Was this question helpful to you? Yes: 0 No: 0
Asked by Cloudchaser 2 years ago
Question: Is the cable UV Resistant?
Answer: Thank you for the question. Our apologies for the delayed response. The Cabling is UV resistant. For additional questions please reach us here: http://support.weboost.com/hc/en-us/requests/new
Was this question helpful to you? Yes: 0 No: 0
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
Warning.E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards