Applied at checkout
Get $10 standard shipping on any order

Antenna Mounting Pole 25 ft. | 900203

email me this page
Email me this page

Works on every network, on any carrier.

Product Description

Designed primarily to work with RV applications, the 25 ft. Antenna Mounting Pole can also be used for mounting outdoor antennas on the side of buildings. The pole requires being mounted to a vertical structure and can be configured to any height from 6-25 ft. by twist-locking the five telescoping sections into place.

This pole is compatible with the Outside Omni Antennas (304421, 304422, 304424, 304421), Directional Yagi Antennas (314475, 314411) and Outdoor Panel Antennas (314453, 314473). 

Benefits include increased isolation between the donor and server antenna which provides a more direct path to the cell tower.

Warning

Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specs

Model Number:900203
Price$ 129.99

Review Snapshot

Ratings Distribution


    Q&A

    Showing 10 out of 20 Questions

    Asked by Slipstream38 5 days ago

    Question: What is the guage of the aluminum pipe tubing?

    Answer: Thank you for your question! In order for us to provide you with the correct information, we suggest reaching out to our customer support team at [email protected] with the reason for needing to know the gauge size. We hope to hear from you soon! Thank you!

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Bob 7 days ago

    Question: Will this mast work with a 311224 antenna

    Answer: Thank you for your question! Yes, the mounting bracket included with the antenna will allow you to mount the 311224 on the 900203.

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Roger 2 months ago

    Question: Does your extendable antenna have a wind speed rating. We will be using it on the coast. Secondly how do the extendable antenna lock in place. Is it a twist and lock design and if so can a side wind unlock a pole section? Will be using it with a Yagi cell phone antenna.

    Answer: Thank you for your question! The pole has a twist and lock design and wind speed rating is 35 MPH. With these types of wind speeds or higher, the antenna is likely to spin and may unlock a section. We recommend taking the pole down with winds of 35 MPH or higher and in any sign of lightning. If you have any other questions that need to be addressed, please feel free to reach back to us at 866-294-1660 or email our online support at [email protected] Thank you and have a great day!

    Was this question helpful to you? Yes: 0 No: 0


    Asked by David 2 months ago

    Question: Hi, I just a little unclear based on the answers here and the manual. When the RV is in travel mode, does the mounting pole lift off those brackets and can thus be stowed inside the RV? I am guessing the antenna would not travel well if left out. David

    Answer: Hi there David. Yes, the pole would need to be lifted off of the mounts and stored in the RV while mobile. Leaving the pole on the RV while mobile runs the risk of losing it. If you have any other questions that need to be addressed, please feel free to reach back to us at 866-294-1660 or email our online support at [email protected] Thank you and have a great day!

    Was this question helpful to you? Yes: 0 No: 0


    Asked by PA Teacher 3 months ago

    Question: What is the wall thickness of the aluminum used in this pole - and - is the thickness the same for the lowest and uppermost sections of the pole?

    Answer: Thank you for your question! In order for us to provide you with the proper information, what is the reason for needing to know the thickness? We want to make sure that we solve any problems that you may have and sometimes knowing what you are trying to solve helps us provide you with a faster solution. Thank you!

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Don 5 months ago

    Question: What is the Antenna mounting pole #900203 made out of? Fiberglas, aluminum, galvanized steel? Thank you.

    Answer: This pole mount is aluminum. If there's any other questions or concerns, please let us know by calling our customer support at 866-294-1660 or our online support at [email protected]

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Darren 5 months ago

    Question: How much weight can the antenna mounting pole handle? I have a 900 MHz antenna for a gps transmitter that weighs roughly 6 lbs without hardware that I would like to mount to this if it will handle the weight fully extended.

    Answer: I am very sorry, but we only recommend that our pole be used for our antennas that we sell on weBoost.com or other sites. If you have any other questions about this products or others, you can contact customer support at 866-294-1660 or our online support at [email protected]

    Was this question helpful to you? Yes: 0 No: 0


    Asked by David 5 months ago

    Question: Can the pole be removed from the mounts before traveling? Also will it works with Weboost RV 4g-x?

    Answer: Sorry, but they cannot be removed since they are locked in. The pole itself stands 6 ft. unextended. It can but the limited coax may be an issue and you'll most likely have to purchase another extended piece to extend the antenna all the way to the top. If you have any other questions regarding the amplifier or it's accessories you can contact customer support at 866-294-1660 or our online support at [email protected] Thank you!

    Was this question helpful to you? Yes: 0 No: 0


    Asked by Jim 6 months ago

    Question: What is the diameter of the pole its self? (Not the foot) The actual Aluminum tube. Bottom section.

    Answer: Min Height: 6 ft Max Height: 25 ft Top of pole measurement: 1 7/8 in. diameter. Bottom of pole measurement (no base): 2 3/8 in. diameter.

    Was this question helpful to you? Yes: 0 No: 0

    Answer: Min Height: 6 ft Max Height: 25 ft Top of pole measurement: 1 7/8 in. diameter. Bottom of pole measurement (no base): 2 3/8 in. diameter.

    Was this question helpful to you? Yes: 0 No: 0


    Asked by RV for fun. 6 months ago

    Question: How do the mounts attach to the RV?

    Answer: Hi there! Here's what the manual says for the Connect RV 65 which has this pole in the kit: "Determine where you want to mount telescoping pole on your RV. Extend pole to maximum height. Use wall mount plates and ground mount to secure pole. We recommend mounting near slider or toy hauler ramp door on the side. Clean the fl at surface of the RV where wall mounts will be placed. Fully extend the pole and attach the wall mount to the top black ‘foot’ mount located on the pole. Remove the adhesive backer and, making sure the pole is level at a 90° angle, firmly attach the wall mount to the RV near the top. There must be at least 4’ of separation between the top and bottom mounts for best performance. Next, attach the other wall mount to the bottom foot mount located on the pole and insert the attached pin. Then remove the adhesive backer and stick to the clean, flat surface." If you want a link to the install guide, follow this link here: https://cdn2.hubspot.net/hubfs/1886759/_web/_weboost/Products/SpecSheet/GDE000078_ConnectRV65_Rev01_04-06-18-b.pdf

    Was this question helpful to you? Yes: 0 No: 0


    BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

    Warning.

    E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards